Editing Minicom alternative - CAEN HV interface (Freeman) (section)

== Quick Reference ==
* Login as '''root''' on host ''''' jlabdaq '''''
** type '''su''' in a terminal window
** Then type the '''root''' password
*** '''Note:''' This program uses lock files to lock a serial port. There may be a way to set permissions on the '''''/var/lock''''' directory so that you do not have to login as root. As of this writing though....you will need the root password
* Type ''''' SW1470 ''''' on the command line, logged in as ''''' root ''''' .
*Top left of screen you will see, ''' File => Add new N147x Board''' 
[[File:CAENMainWindow.png|160px]]
*This pops up a new window: 
[[File:CAENAddBoardWindow.png|150px]]

* Window Settings:
** Connection type: '''USB '''
** Comm port: '''ttyUSB0''' and '''9600''' '' (for USB port 0 and baud rate of 9600)''
** Module address: '''0''' '' (For non daisy chained module)''
*This should pop up a window with the 4 HV channel settings. '' (if not, see troubleshooting below)''
[[File:CAENHVControl.png|400px]]