Editing Physics Analysis of ROOT Output (section)

===Corrected ADC spectra===
The ADC data was then corrected just as the TDC data was. The data was centered around the 1000 point range. The way the ADC plots are corrected is by using the pedestals from the raw output (fixed data points that result in the graph spiking when no pulses are detected) and the average of the data to determine a gain factor. This has the effect of eliminating spikes seen at the beginning of the data (near 0, refer to the raw data plots). This corrected data graph is shown below, along with the math used to determine the corrected data values.

<math>gain = \frac{average - pedestal}{center}</math>

<math>correctedADC = \frac{rawADC}{gain} - pedestal</math>

[[File:Corrected_ADC_spectra_31.png]]