Editing Scintillator Preparation (section)

=== Gluing/Curing Process ===

In order to fix the broken scintillator set-up, a special UV glue can be utilized to bond the two pieces together. 

==== Possible Steps ====

1. Remove previous bonding material by using scissors or a razor to scrape off the cement 

2. Prepare a level surface for the two pieces set 

3. Once level, glue one edge of the scintillator and firmly press it against the other 

4. Clamp the ends to ensure a good connection 

5. Use a heavy object to apply pressure at either end of the scintillators 

6. Now apply the UV light (try to get as close as possible and cover a large amount of surface area)

7. Cure for the recommended amount of time for the bonding cement to harden 

8. Let the glue dry and harden for a 24 hour period